Philips D2701B/25 - Page 28

EN28
Rename the handset
You can rename the handset for your easy
reference with the base.
The name of the handset can be up to
10characters. It is displayed on the handset
screen in standby mode.
1
Press .
2
Select [HS SETTINGS] > [RENAME HS],
then press to conrm each selection.
3
Enter and edit the name, To erase a
character, press .
4
Press to conrm.
»
The setting is saved.
Set the date and time
For information, see ‘Set the date and time’ in
Chapter 3 ‘Get started‘, Section ‘Configure
your phone’.
Set the display language
For information, see ‘Set the display
language’ in Chapter 3 ‘Get started‘, Section
‘Congure your phone’.
Set auto answer
You can set your handset to auto answer the
call once you lift it from the base.
1
Press .
2
Select [HS SETTINGS] > [AUTO ANSWER],
then press to conrm each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.
Set alarm
You can set the alarm alert with handset.
Set alarm on and alarm time
1
Press .
2
Select [HS SETTINGS] > [ALARM], then
press to conrm each selection.
3
Select [ON], then press to conrm.
4
Enter the alarm time (in 12-hour or
24-hour setting, as set in the TIME
FORMAT setting).
»
The screen displays SNOOZE, then
press to conrm.
5
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.
Set alarm o
1
Press .
2
Select [HS SETTINGS] > [ALARM], then
press to conrm each selection.
3
Select [OFF], then press to conrm.
»
The setting is saved.
Set mailbox
1
Press .
2
Select [HS SETTINGS] > [MAILBOX], then
press to conrm each selection.
»
NUMBER - displays; - cursor ashes.
3
Enter a number and then press to
conrm.
»
Press to delete a character.
Press / to move the cursor left
or right.