Philips D2701B/25 - Page 29

29EN
12 Base settings
Ring settings
Note
• Available only for D275.
Set the base’s ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
Note
• If the ringer volume is set to o, the
base is silenced for all incoming calls.
1
Press .
2
Select [BS SETTINGS] > [RING VOLUME],
then press to conrm each selection.
3
Select a volume level, then press to
conrm.
»
The setting is saved.
Set the base’s ringtone
You can select from 5 ringtones.
1
Press .
2
Select [BS SETTINGS] > [BS RINGER], then
press to conrm each selection.
3
Select a volume level, then press to
conrm.
»
The setting is saved.
Deregister the handsets
1
Press .
2
Select [BS SETTINGS] > [DELETE HS], then
press to conrm each selection.
»
[PIN?- - - -] displays; the “- - - -” cursor
ashes. Default 4-digit PIN is 0000.
To erase a character, press .
The PIN will be masked as ****.
3
Enter the 4-digit PIN and then press to
conrm.
»
The deleted handset will be removed
from the registered handsets list,
and the antenna icon will disappear.
[REGISTER] displays.
Note
• The preset PIN is 0000. If the PIN is
incorrect, the deregistration fails and the
screen returns to the previous menu.
• A handset cannot deregister itself.
Set dial mode
The phone supports tone (DTMF) and pulse
(rotary) dial. The dial mode is preset to touch
tone dialing. If you have pulse (rotary) service,
you need to change the dial mode to pulse
dialing before using the telephone to make a
call.
1
Press .
2
Select [BS SETTINGS] > [DIAL MODE],
then press to conrm each selection.
3
Select [TONE] or [PULSE], then press
to conrm.
»
The setting is saved.