Philips D2701B/25 - Page 30

EN30
Set ash time
Make sure that the recall time is set correctly
before you can answer a second call. In
normal case, the phone is already preset for
the recall duration. You can select among
3options: [Short], [Medium] and [Long]. The
number of available options varies in
different countries. For details, consult your
service provider.
1
Press .
2
Select [BS SETTINGS] > [FLASH TIME],
then press to conrm each selection.
»
There are 3 options: SHORT, MEDIUM
(by default), and LONG.
3
Select an option, then press to
conrm.
»
The setting is saved.
Change PIN
1
Press .
2
Select [BS SETTINGS] > [CHANGE PIN],
then press to conrm each selection.
»
[OLD PIN?- - - -] displays; the “- - - -”
cursor ashes. Default 4-digit PIN is
0000.
To erase a character, press .
The PIN will be masked as ****.
3
Enter the current 4-digit PIN and then
press to conrm.
»
If the old PIN is correct, it will show
[NEW PIN?- - - -] with the “- - - - “
cursor ashes.
4
Enter the new PIN, then press .
5
Re-enter the new PIN to double conrm.
Press to save.
»
The setting is saved.
Set ECO mode
You can reduce transmission power by setting
the ECO mode.
1
Press .
2
Select [BS SETTINGS] > [ECO MODE],
then press to conrm each selection.
3
Select [ON] or [OFF], then press to
conrm.
»
The setting is saved.