Philips D2701B/25 - Page 31

31EN
13 Registration
Register additional handsets
You can register additional handsets to the
base station. The base station can register up
to 4 handsets.
1
If the handset is in [REGISTER] status,
press .
2
Select [REGISTRATION], then press to
conrm.
»
[PIN?- - - -] displays; the “- - - -” cursor
ashes. Default 4-digit PIN is 0000.
To erase a character, press .
The PIN will be masked as ****.
3
Enter the 4-digit PIN and then press to
conrm.
»
[PLEASE WAIT] displays.
4
Press and hold at the telephone base
for about ve seconds.
»
You hear a beep when the
registration process completes.
»
Registration is complete in less than
1 minute. The base automatically
assigns a handset number to the
handset.
Note
• If the PIN is incorrect or no base is found
within a certain period, the handset will
fail to register to the base. [REGISTER]
displays if the handset fails to register to
the base.
• If registration fails, unplug the power
adapter from the base station and plug
it back. Wait for 15 seconds, and then
repeat the registration procedure.
• The preset PIN is 0000.