EN40
18 Notice
Declaration of conformity
Hereby, TP Vision Europe B.V. declares that
the product is in compliance with the
essential requirements and other relevant
provisions of RED Directive 2014/53/EU and
UK Radio Equipment Regulations SI 2017
No.1206. You can find the Declaration of
Conformity on www.philips.com/support.
Use GAP standard compliance
The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with
a minimum operating standard irrespective
of their make. The handset and base station
are GAP compliant, which means they
guarantee the minimum functions: register a
handset, take the line, make a call and receive
a call. The advanced features may not be
available if you use them with other makes.
To register and use this handset with a GAP
compliant base station of dierent make, rst
follow the procedure described in the
manufacturer’s instructions, then follow the
procedure described in this manual for
registering a handset. To register a handset
from dierent make to the base station, put
the base station in registration mode, then
follow the procedure described in the
handset manufacturer’s instructions.
Compliance with EMF
This product complies with all applicable
standards and regulations regarding
exposure to electromagnetic elds.
Disposal of your old product and
battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of
with normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct
disposal of old products and batteries helps
prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see
Section ‘Install the supplied batteries’.
When this logo is attached to a product, it
means a nancial contribution has been paid
to the associated national recovery and
recycling system.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard
(box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
To Next Page
Loading...
