Philips D455 - Overview of the base station

4
Enjoy
Phonebook
Add record
1 Press [Menu].
2 Select [Phonebook] > [Add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press
.
2 Select a record and press
.
3 Follow on-screen instructions.
Direct access memory
You have up to 2 direct access memories (keys 1
and 2). To dial the saved phone number automatically,
press and hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are
preset to the voice mail number and information
service number of your service provider respectively
(network dependent).
Call log
Call from the call log
1 Press
.
2 Select a record and press
.
View record
Press
> [Option] > [View].
Save record
1 Press
> [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press
> [Option] > [Delete].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press [Redial].
2 Select a record and press .
Save record
1 Press [Redial] > [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press [Redial] > [Option] > [Delete].
2 Follow on-screen instructions.
Record an announcement
(for D455 only)
1 Press [Menu] > [Answ. Machine] >
[Announcement].
2 Follow on-screen instructions.
Register additional handsets
You can register additional handsets to the base
station.
1 Press [Menu].
2 Select [Services] > [Register], then press
[OK] to conrm.
3 Press and hold on the base station for 5
seconds.
4 Enter the system PIN/passcode (0000).
5 Press [OK] to conrm the PIN/passcode.
»
Registration is complete in less than 2 minutes.
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Press [Menu].
2 Select [Services] > [Reset], then press [OK]
to conrm.
3 Follow on-screen instructions.
Note
• You may recall the original PIN/passcode by
following this procedure.