Philips DCB7005/10 - Page 11

11
English
Connect speakers
Note
 

 
 



 the red branch for the connectors marked
+”
 
-”
1 

2 Connect a speaker cable to the left
speaker and the SPEAKER OUT L (+/-)

3 
4 Connect the other speaker cable to the
right speaker and the SPEAKER OUT R
(+/-)
5 
DEMO
a
a
b
c
bc
3 Preparations
Place the product
Place the speakers at an angle of approximately

Note
 


Connect


Note
 Refer to the type plate at the back or bottom of the

 Before you make or change any connections, make sure


 The DEMO jack is only applicable to the demo unit



EN