Philips DCM250 - Play Options

18 EN
6 Play options
Skip to a track
For CD:
1 Press / to select another track.
To select a track directly, you can •
also press a key on the numerical
keypad.
For MP3 disc and USB:
1 Press to select an album or folder.
2 Press / to select select a track or fi le.
Pause/resume play
1 During play, press to pause/resume
play.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Display play information
1 During play, press DISPLAY repeatedly to
select different play information.
Repeat play
1 During play, press REPEAT repeatedly to
select:
•
: The current track is played
repeatedly.
•
: All tracks are played
repeatedly.
For MP3/WMA and USB: • and
[ALB]. The current album is played
repeatedly.
2 To return to normal play, press REPEAT
repeatedly until the repeat mode is no
longer displayed.
Random play
1 Press SHUFFLE.
»
is displayed. All tracks are played in
a random sequence.
2 To return to normal play, press SHUFFLE
again.
Tip
The repeat and shuffl e functions cannot be activated at •
the same time.
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB mode, at the stop position,
press PROG to activate the program
mode.
[PROG] (program) blinks on the »
display.
2 For MP3/WMA tracks, press to select
an album.
3 Press / to select a track number, then
press PROG to confi rm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
During play, [PROG] (program) is »
displayed.
To erase the program, in the stop •
position, press
.