Philips DTP100 - Specifications; Supply and IO Ports; Screen Details; Operating System and Software

specifications
DTP100 Instruction Manual Rev D.docx 3
internal view
Supply +VE:
12V DC @ 400mA from the DyNet Network
IO ps:
1 x RS485 DyNet serial port,
1 x RJ45 10/100BaseT Ethernet port,
1 x InfraRed Remote receiver,
1 x Mini USB Type B service socket (programming port),
1 x Mini USB Type B service socket (keyboard/mouse)
Screen:
Viewable Area: 10.8cm (4.3”) diagonal, (H 5.68cm x W 9.5cm)
Resolution: 480x272 (16:0 screen ration)
Colour Depth: 16bit (65535)
Contrast: 400:1 Luminance: 350 cd/m
2
Screen Type: TFT LCD
Viewing Angle: H 75° Vtop 75° Vbottom 45°
Backlight: Dimmable CCFL 40,000 hr rated
Touch Overlay: 4 wire resistive
Operating System & Software:
Windows CE 5.0, Internet Explorer 6, Windows Media Player 9 with
MP3 support
Compliance:
CE, C-Tick
Ambient Temperature:
0° to 45C ambient temperature
10% to 90% RH non-condensing
Audio:
On board speaker
Line out via 3.5mm stereo jack
Microphone
Construction:
Concealed fixings fascia
Hardware:
CPU: Intel XScale PXA270 520MHz
Non Volatile Memory: FLASH, 128Mb
Volatile Memory: SDRAM, 64Mb
Dimensions:
Exposed: H 86mm x W 146mm x D 5mm
Packed weight:
0.9 kg
Keyboard/Mouse port -
Type B USB Socket
Programming port -
Type B USB Socket
DyNet port
Ethernet RJ45
network socket
3.5mm stereo jack