100
Changing the PIN
1
Switch on the TV. If required, select the channel number for the
DVD Recorder (channel 3 or 4 or the Audio/Video In channel).
2
Turn on the DVD Recorder by pressing STANDBY-ON m .
3
Press SYSTEM-MENU . The menu bar will appear.
4
Select '
A
' using D or C .
5
Select line '
1
(Disc features)' using B or A and confirm with
C .
Access control Enter code…
Auto resume On
6
Confirm the line 'Access control' by pressing C .
7
Press the number buttons to enter your four-digit code. If this is
you first time entering your code, you must enter this code a
second time to confirm it.
8
Select the line 'Change code' using A or B and confirm with
C .
9
Enter the new code with the number buttons 0..9 . Re-enter the
code for confirmation.
10
To end, press D and SYSTEM-MENU .
I forgot my code.
When it asks for the code (step 7 ), press the STOP h button four
times and then press OK . The code entry is now deactivated. You can
now enter a new code as described above.
Tip
Access control (Child lock)
To Next Page
Loading...
