72
Selecting the recording mode
(picture quality)
By selecting a recording mode, you define the picture quality of recordings and the maximum
recording time for a disc.
To check the quality of a recording mode you can make a 'test recording' with the desired
recording mode. Check during playback the quality of this 'test recording'.
For playback, the correct picture quality will automatically be selected.
1
Switch on the TV. If required, select the channel number for the
DVD recorder (channel 3 or 4 or the Audio/Video In channel).
Select the record mode with the button REC MODE on the
remote control.
Which recording modes can I choose?
Please observe, that you can not switch the recording type
during recording. You have to interrupt the recording with the
STOP h button.
'M1': High Quality offers the best picture quality with a total recording
time of 1 hour.
'M2': Standard Play (pre-recorded DVD quality) offers excellent picture
quality with a total recording time of 2 hours.
'M2x': Standard Play plus (better than S-VHS picture quality) offers
excellent picture quality with a total recording time of 2.5 hours.
'M3': Long Play (S-VHS picture quality). Total recording time of 3 hours.
'M4': Extended Play (better than VHS picture quality). Total recording
time of 4 hours.
'M6': Super Long Play (VHS picture quality). Total recording time of 6
hours.
Can I also change the recording mode via a menu?
1 Press the SYSTEM-MENU button.
2 Select '
A
' using D or C .
3 Select line 'Record settings' using B or A and confirm with
C .
4 At 'Rec Mode,' select the recording mode using D or C .
5 Confirm with OK and end with SYSTEM-MENU .
6 If you select the 'M3', 'M4'or'M6' recording modes, you can select
the 'Stndrd' (standard) or 'Sport' (for quick movements) settings
in the 'Filter mode' line.
Tip
Recording
To Next Page
Loading...
