Philips DVDR3390 Firmware Upgrade Guide

Philips AVS
DVDR3390_EU Firmware Upgrade
Firmware Upgrade
We have developed a firmware upgrade to improve your product.
This upgrade is applicable for the following models:
DVDR3390/37.
This firmware version improves: Click here for more details
Logic verifier fix.
Scart performance improvement.
VPS timer recording fix.
Note: Before you proceed to upgrade, please be reminded that you need to do configuration again
each time after firmware upgrade!
Upgrade Procedure
Ste
p
1
Check your current version
First check your current firmware version to see if you need to upgrade:
1. Keep no disc in DVD tray.
2. Press <0>, <0>, <0>, <9>, <OK> on the Remote Control.
3. The software version is "DVDR3390_37_VXX_XX, Drive: 45.04.XX.XX" or
“DVDR3390_37_VXX_XX, Drive: 51.05.XX.XX" displayed on the TV screen.
4. Compare the version shown on screen with this firmware upgrade version, V03_20,
45.04.05.07/51.05.02.05.
If the current software is lower than V03_20, proceed to step 2.
If the loader version shown on the screen is 45.04.XX .XX and XX.XX is lower than 05.07, proceed to
step 2.
If the loader version shown on the screen is 51.05.XX.XX and XX.XX is lower than 02.05, proceed to
step 2.
Otherwise, no upgrade is necessary.
Ste
p
2
Download Firmware upgrade
Click the link to save the software on your computer.
Ste
p
3
Burning Upgrade on CD-R / CD-RW
1. Extract the files by unzipping the zipped file – DVDR3390_37_Vxx_xx.zip
(Do not rename the filenames)
Tip: For more
information on burning
software we refer to
two popular burning
software programs
www.nero.com
www.easycdcreator.com
2. Write the extracted files – not the zip file – onto a blank CD-R or CD-RW disc,
using the following settings:
- File System: ISO 9660 + Joliet
- File name length : max11 chars = 8+3 (Level 1)
- Mode : 2/XA
- Character set : ISO 9660 (ISO norme CD-ROM)
- No multi session
- Write Speed : Low
3. Finalize the disc. (The application may do this automatically.)
4. If you need to upgrade the loader software, select the file PHILIPS_45040507.bin if your drive version is
45.04.XX.XX or the file PHILIPS_51050205.bin if your driver version is 51.05.XX.XX
5. Write the selected file onto another blank CD-R or CD-RW disc, using the same settings as above.
6. Finalize the disc. (The application may do this automatically.)
Ste
p
4

Philips DVDR3390 Specifications

General

Package depth	413 mm
Package width	571 mm
Package height	124 mm
Package weight	4000 g
Set width	435 mm
Set weight	3000 g
Programming period	30 day(s)
Analog signal format system	NTSC
Power consumption (standby)	3 W

Weight and Dimensions

Depth	322 mm
Height	43 mm