Philips DVDR3570H/05 User Manual

DVDR3570H/05/31/51/58
And
DVDR3590H/05/31/51/58
Service Package
Version 1.2
The table below gives the summary of all the files in the service package.
Please refer to this document for the required information.
Chapter No. Reference Document & Instructions
Chapter 1 Technical Specifications and
Connection Facilities
Chapter 2 Safety Information, General notes
& Lead-free Requirements
Chapter 3 Directions for Use / QUG Direction for use is available at website:
www.p4c.philips.com
(/31)
/05/51/58)
Chapter 4 Mechanical Instructions
Chapter 5 Firmware Upgrading, Alignment
and Test Procedures, and
Diagnostic Software
(Firmware Upgrading, Alignment and Test
Procedures)
(Diagnostic Software)
Chapter 6 Block Diagram & Wiring Diagram
Chapter 7 Electrical Circuits & Layout
Drawings, Test Point View,
1. Front Panel:

Philips DVDR3570H/05 Specifications

General

Brand	Philips
Model	DVDR3570H/05
Category	DVD Recorder
Language	English

Summary

2. Safety Information & Requirements

2.1 Safety Instructions

General safety regulations, laser safety, and precautions for repair and handling.

2.2 Warnings

General warnings for ESD, live voltage sections, and potential hazards during servicing.

2.3 Lead Free Requirement

Information on lead-free production, identification, and soldering requirements.

1. Connect

2. Set up

3. Enjoy

1. Firmware Upgrading

1.1 Preparation and Procedures

Steps for preparing upgrade files, creating a CD, and applying firmware via normal or forced download.

1.3 Confirming Firmware Version

Procedure to check the current firmware version after an upgrade has been performed.

Firmware Procedures

1.4 Development Version Info Screen

Accessing detailed software information and development version details.

1.5 Formatting HDD Drive

Steps to format a new or unformatted Hard Disk Drive for use in the device.

1.6 Virginize the Set

Instructions for resetting the set to factory defaults, which erases user information.

2. Alignments & Test Procedures

Replacing the Digital Board

Procedure for replacing the digital board and restoring crucial factory settings.

2.1 Slash Version

Details on slash versions and how to set or display them using diagnostic commands.

2.2 IEEE Unique Number

Method for calculating and setting the IEEE Unique Number for the device.

Hardware ID Setting

2.3 Setting Hardware ID

Procedure for setting the Hardware ID (Diversity String) and its importance for system boot.

1. Mechanical Instructions

1.1 Dismantling DVD Tray Cover

1.2 Dismantling Front Panel

Mechanical Disassembly

1.3 Dismantling Basic Engine

1.4 Dismantling PSU Board

1.5 Dismantling Digital Board

1.6 Dismantling HDD

1.7 Dismantling Analog Board

1. Technical Specifications