Philips DVDR3570H/05 - Hardware ID Setting; 2.3 Setting Hardware ID

Test OK@
The set has now its original IEEE unique number.
With DS command 1208 the number can be displayed
2.3. Setting Hardware ID
With DS command 1228 (command mode interface) the system settings including the Hardware “Diversity
String” can be displayed.
Note: An error in the Diversity string will render the set not able to boot-up and the Digital board will be
defective.
Via the Dignostic Software the “Diversity String” can be stored with the command 1226, followed by the
“Diversity String” as parameter. That stored “Diversity String” can be checked with the DS command 1229.
The Diversity strings used in DVDR3570H and DVDR3590H are as follows:
Non EPG sets, DVDR3570H/05/51/58 and DVDR3590H/05/51/58:
44424849C05840014C2B30365F3700007520070000020300000101004002000044564452323030312E30303
10202000000010300000002010000020000000000
EPG sets, DVDR3570H/31 and DVDR3590H/31
44424849E04840014C2B30365F3700006520070000020300000101004002000044564452323030312E303031
0202000000010300000002010000020000000000
Example:
DS:> 1226
44424849E04840014C2B30365F3700006520070000020300000101004002000044564452323030312E303031
0202000000010300000002010000020000000000
122600:
Test OK @