1. Technical Specifications and Connection Facilities
1.1. PCB Locations
Basic En
ine
Front Boards (Behind
the Front Plate
HDD Di
ital Boar
Analo
Boar
PSU Boar
1.2. General
Mains voltage: 220V-240V
Mains frequency: 50 Hz
Power consumption (DVDR3570H): 28 W
Power consumption (DVDR3590H): 32W
Standby Power consumption: <3.7W
1.3. RF Tuner (Analogue)
Test equipment: Fluke 54200 TV Signal generator
Test streams: PAL BG Philips Standard test pattern
1.3.1.1. System
B/G, I, L/L’, D/K
1.3.2. RF – Loop Through:
Frequency range: 43 MHz – 860 M Hz
Gain (ANT IN – ANT OUT) standby mode: -2.5 dB to -4dB
Gain (ANT IN – ANT OUT) active mode: 2 dB± 4dB
1.3.3. Receiver
Output of Euro connector/Cinch to be used for measurements (direct output from front end)
Video Performance:
Frequency response (0 - 4.4 MHz): 0 ± 4dB
Group delay (0 - 4.4 MHz): 0 ± 150 n sec
Audio Performance (Analogue Mono):
Frequency response (100 Hz – 12 kHz) relative to 1 kHz: 0 ± 3dB