EasyManua.ls Logo

Philips DVDR75 - Remote Control Overview; Button Functions

Philips DVDR75
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The remote control
MONITOR Monitor: This button lets you switch between the TV receiver (internal
tuner) in the DVD recorder (TV picture on the TV set) and playback on
the DVD recorder.
STANDBY m Switch on or off: To switch set on or off, interrupt menu function,
interrupt a programmed recording (TIMER)
TV/DVD TV/DVD switch: Switches the scart socket EXT 2 AUX-I/O directly
to the TV set. This lets you watch the picture from any unit connected
to this scart socket (set-top box', video recorder or satellite receiver)
and at the same time record from another source.
If you have not connected a device to the EXT 2 AUX-I/O socket, use
this button to switch between TV reception and the DVD recorder.
But this only works if you use a scart cable to connect the TV set to
your DVD recorder ( EXT 1 TO TV-I/O socket) and your TV set
responds to this switch-over.
T/C Title/Chapter: Choose the '
B
'(Title)/'
C
'(Chapter) directly from the
menu bar
If 'INFO' appears in the display, the index menu from a recorded disc or
an introductory film will be shown. In this case, this function is not
available.
PLAY MODE Playback type: Choose between repeat, shuffle play and intro-scan
REC MODE Record type (quality): To select the maximum possible record time
0..9 Number buttons:0-9
DISC-MENU Disc menu: To show the DVD menu or the index screen
SYSTEM-MENU System menu: Call up/cancel the main menu (menu bar at the top of
the screen)
SELECT Select: Select function/value
OK Store/confirm: To store or confirm entry
DC Cursor keys : Cursor left, right
CH+ A Cursor buttons/Plus : Cursor up/ Next programme number
CH- B Cursor buttons/Minus : Cursor down / Previous programme number
TIMER TIMER: To make a TIMER programming with ShowView
®
/without
ShowView
®
or to alter or clear a programmed TIMER
FSS & EDIT: For displaying the edit menu for DVD+R(W) discs, for setting
chapter markers
RETURN Back: Return to previous menu on a video CD (VCD). This also works
with some DVDs.
CLEAR Delete: To delete last entry or clear programmed recording (TIMER)
PLAY G Playback: To play a recorded disc.
ENGLISH

Other manuals for Philips DVDR75

Related product manuals