102
Disc features
Access control Enter code…
Auto resume On
6 Confirm 'Access control' using C .
7 Enter a 4-digit code of your choice. If the code is new, you may have
to enter the code a second time as confirmation.
8 Select the 'Parental level' using P+ A or P- B and confirm with
C . A bar appears to select the parental level.
9 Select the appropriate rating using P- B , P+ A or the number
buttons 0..9 .
What do the ratings mean?
Rating 0 (displayed as '--') parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene contains a higher level than the rating
set?
If the recorder does not find a suitable alternative, playback will stop and you
must enter the four-digit code.
Tip
0 Confirm with OK . Quit using D and SYSTEM-MENU .
Changing the country
The set filter values depend on the respective country. It is therefore necessary to enter the
country to which these filter values apply.
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY-ON m .
3 Press SYSTEM-MENU . The menu bar appears
4 Select the '
A
' icon using D or C .
5 Select line '
2
(Disc features)' using P- B or P+ A and confirm
with C .
Disc features
Access control Enter code…
Auto resume On
6 Confirm the line 'Access control' using C .
7 Enter your four-digit code. If the code is new, you may have to enter
the code a second time as confirmation.
8 Select 'Change country' using P- B or P+ A and confirm with
C .
9 Select the corresponding country using P+ A or P- B and confirm
with OK .
0 To end, press D and then SYSTEM-MENU .
Access control (Child Lock)
To Next Page
Loading...
