37
1 1 2:04
1 If playback does not start automatically, press PLAY/PAUSE G9 .
The display shows:
title, chapter, time elapsed.
2 To stop the disc, press STOP h on the remote control or
hSTOP on the DVD recorder.
3 To eject the disc, press OPEN/CLOSE on the front of the DVD
recorder.
Playing a DVD+RW/+R disc
1 If the disc is write-protected or a finalised DVD+R disc, playback
starts automatically.
2 ANNA P01
2 If playback does not start automatically, select the title you want to
watch from the Index Picture Screen using B or A .
You can also use the N or O buttons on the front of the set.
3 Press PLAY/PAUSE G9 .
The display shows:
title number, recording quality.
a I see the message 'EMPTYDISC' in the display
b There are no recordings on this disc.
Problem
4 To stop the disc, press STOP h on the remote control or
hSTOP on the DVD recorder.
5 To eject the disc, press OPEN/CLOSE on the front of the DVD
recorder.
What should I note when playing back different recording types
(qualities)?
The correct recording quality 'HQ(HQ), SP(SP), SP+(SP+), LP(LP), EP(EP),
EP+(EP+)' will automatically be selected during playback.
For more information, please read section 'Selecting the recording type
(Quality)' in chapter 'Manual recording'.
?
ENGLISH
Playback
To Next Page
Loading...
