50
Lining up recordings within a title
(assemble cut)
You can add further recordings to a title already contained on a DVD+RW disc. This recording
will be added to the title as a so-called 'chapter'. Existing information will be overwritten from
this location onward. Depending on the length of the recording, this will also overwrite titles
that follow the current title. The recording mode (quality) is automatically transferred from the
current title.
To play back this recording, press SYSTEM-MENU and select 'C' (chapter) using C . You can
also use T/C .
For more information, read section 'Changing to a different title/chapter' in chapter 'Playback'.
What happens with DVD+R discs?
New recordings on 'DVD+R' discs can only be added after existing recordings.
It is not possible to overwrite existing recordings on 'DVD+R' discs.
?
1 Find the title in the Index Picture Screen where you want to insert
the new recording.
2 Look at the last minute of the old recording (playback)
3 Press PLAY/PAUSE G9 on the remote control at the position
where the new recording is to go. '9' will appear on the display.
4 To monitor the recording you can switch to the internal tuner using
MONITOR .
5 Now start recording as usual by pressing REC/OTR n on the
remote control.
The new recording will be inserted.
6 Stop recording with STOP h .
Manual recording
To Next Page
Loading...
