VPS/PDC Video programming system / programme delivery control: A VPS or
PDC code will be transmitted for the selected TV program
NICAM The DVD recorder has detected a Nicam audio signal.
STEREO During playback a HiFi/2 channel tone was detected or a HiFi/2 channel
tone was received
Multi-function display/Text line
•) Clock
•) Disc/title playing time
•) OTR switch-off time
•) Title name
•) Display of programme number of TV channel/position/channel
name/function.
•) Display of informations, warnings.
Messages in the DVD recorder display
READING
The following messages may appear in your DVD recorder display
IS TV ON? The DVD recorder is currently in the initial installation mode. Switch on
your TV set and read section 'Installing your DVD recorder' in chapter
'Initial Installation'.
NO SIGNAL No input signal available (signal inadequate or unstable)
MENU The menu on the screen is active
OPENING Disc tray opening
TRAY OPEN Disc tray open
CLOSING Disc tray closing
READING Disc being read
MENU UPDT Once recording has been successfully completed the table of contents is
created.
INIT MENU The menu structure is created after the first recording has been made
on a new disc
COPY PROT You have tried to copy a copy-protected DVD/video cassette.
WAIT Please wait until this message disappears. The DVD recorder is busy
performing a task.
NO DISC No disc has been inserted for recording. If a disc has been inserted,
perhaps it cannot be read.
INFO Information on the inserted DVD is displayed on the screen
BUSY The DVD recorder is processing the changes to make them DVD
compatible
ERASING The entire disc is erased
ENGLISH
To Next Page
Loading...
