51802 - The front panel could not be accessed
by the Analog Board.
51803 - The front panel could not be dimmed.
51804 - The user skipped the FP-Dim test.
51805 - The user returned an unknown confirma-
tion: confirmation
51901 - Execution of the command on the
Analog Board failed.
51902 - The front panel could not be accessed
by the Analog Board.
51903 - The front panel did not show segments
blinking.
51904 - The user skipped the FP-blinking test.
51905 - The user returned an unknown confirma-
tion: confirmation
52001 - Execution of the command on the
Analog Board failed.
52002 - The front panel could not be accessed
by the Analog Board.
52003 - The front panel did not show all seg-
ments lit.
52004 - The user skipped the FP-light all seg-
ments test.
52005 - The user returned an unknown confirma-
tion: confirmation
52201 - Communication with Analog Board fails.
52202 - front panel can not be accessed by the
Analog Board.
52301 - Communication with Analog Board fails.
52302 - front panel can not be accessed by the
Analog Board.
60101 - Basic Engine returned error number 0x
error number
60102 - Parity error from Basic Engine to Serial
60103 - Communication time-out error
60104 - Unexpected response from Basic
Engine
60105 - Echo loop could not be closed
60106 - Wrong echo pattern received
60200 - Version: nr1.nr2.nr3
60201 - Basic Engine returned error number
0xerrornumber
60202 - Parity error from Basic Engine to Serial
60203 - Communication time-out error
60204 - Unexpected response from Basic
Engine
60205 - Front Panel failed.
60301 - Basic-Engine time-out error
60401 - Basic Engine returned error number
0xerrornumber
60402 - Parity error from Basic Engine to Serial
60403 - Communication time-out error
60404 - Unexpected response from Basic
Engine
60405 - Focus loop could not be closed
60501 - Basic Engine returned error number
0xerrornumber
60502 - Parity error from Basic Engine to Serial
60503 - Communication time-out error
19
To Next Page
