EasyManua.ls Logo

Philips DVDR985 - Front Panel Controls and Indicators

Philips DVDR985
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61718 - BE VSM Sector processor initialization
failed
61719 - BE VSM sector processor DMA initial-
ization failed
61720 - BE VSM sector processor DMA start
failed
61721 - BE VSM sector processor start failed
61722 - BE seek command failed
61723 - BE VSM sector processor error occurred
61724 - BE read timeout occurred
61725 - BE stop command after reading failed
61726 - BE difference found in data at disc sec-
tor 0xdiscsector
61727 - This nucleus cannot be executed
because the Self-Test failed
61801 - BE I2C initialization failed
61802 - This nucleus cannot be executed
because the Self-Test failed
61901 - The Self Test failed with result: 0xnr1
0xnr20xnr3
61902 - Basic Engine returned error number
0xerrornumber
61903 - Parity error from Basic Engine to Serial
61904 - Communication time-out error
61905 - Unexpected response from Basic
Engine
62001 - Self-Test: errorstring1 Laser-Test:
errorstring2 Spindle M-Test: errorstring3 Sledge
M-Test: error string4 Focus-Test: errorstring5
62100 - The forward sense level is 0xlevel
62101 - Basic Engine returned error number
0xerrornumber
62102 - Parity error from Basic Engine to Serial
62103 - Communication time-out error
62104 - Unexpected response from Basic
Engine
62201 - The BE-self-diagnostic-spindle-motor-
test failed
62202 - Basic Engine returned error number
0xerrornumber
62203 - Parity error from Basic Engine to Serial
62204 - Communication time-out error
62205 - Unexpected response from Basic
Engine
62301 - The BE-focus-test failed
62302 - Basic Engine returned error number
0xerrornumber
62303 - Parity error from Basic Engine to Serial
62304 - Communication time-out error
62305 - Unexpected response from Basic
Engine
62401 - The BE-self-diagnostic-sledge-motor-test
failed
62402 - Basic Engine returned error number
0xerrornumber
62403 - Parity error from Basic Engine to Serial
62404 - Communication time-out error
62405 - Unexpected response from Basic
Engine
62700 - BE EEPROM address = address -> Byte
value = 0xvalue
62701 - Basic Engine returned error number
21