Philips Electronics Singapore Software Upgrade Instruction
6 Burning upgrade software on CD-R or CD-RW 6 Burning upgrade software on CD-R or CD-RW
1. Extract the files by unzipping the zipped file.
Tip: For more information on
burning software we suggest
you can refer to two popular
burning software programs
www.nero.com
www.easycdcreator.com
2. Write the extracted files – not the zip file - onto a blank CD-R or CD-RW disc,
using the following settings:
• File System CD-ROM Joliet
• File name length: max 31 chars (ISO Level 2)
• Mode: 2/XA
• Character set ASCII
• Single session
• Write speed: low
3. Finalize the disc. (The application may do this automatically.)
Using Nero Express 6
Please make sure you are using Nero Express. You can start Nero Express from
the Nero folder in Windows Start menu.
1. Insert a blank CD-R or CD-RW disc.
2. Open Nero Express and select “Data disc”.
3. Click on the “Add”
tab to browse.
4. Select the unzipped files
5. Click “Add” and “Finished”.
2 of 4
To Next Page
Loading...
