24
First steps
Table of contents
1
Stop the recording currently in progress.
2
Insert the plug into the MIC microphone output on the top
(DVT1000, DVT1500) or the side (DVT3000 – DVT7000) of the
device.
3
Put the microphone earpiece into your ear.
4
Start recording.
5
Call from any mobile or landline. Hold your mobile or the phone
receiver close to the microphone.
4.11.4 How to use the meeting microphone
Scope of delivery: DVT7000
The meeting microphone can be used during a meeting or a multi-
participant conference. For optimum sound quality, the participants
should not be more than two meters away from the microphone.
1
Stop the recording currently in progress.
2
Insert the plug into the MIC microphone output on the top
(DVT1000, DVT1500) or the side (DVT3000 – DVT7000) of the
device.
MICEAR
EAR
MIC
3
Switch the external source settings to mono microphone (see also
chapter 9.1.14 Selecting an external sound source, page 47).
4
Start recording.
Tip
• If a recording is to be made in larger rooms or at meetings
with a larger number of participants, the recording range may
be extended by connecting up to a maximum of three meeting
microphones.
To Next Page
Loading...
