Philips DVT7000/00 - Record Settings: File Location; Automatic Record Settings Adjustment

40
Settings
Table of contents
9 Settings
Press the MENU key while the device is stopped (start-up screen) to
enter the Settings menu.
Note
• Press the j key at the end of an operation to return to the
stop mode. Press the j key during the operation to cancel the
operation without having to save and return to the stop mode.
9.1 Record settings
9.1.1 Set file location
The display shows a folder icon which indicates where the recordings
are currently being stored: u, v, w, x, y–internal memory, à,
á, â, ã, ä–memory card.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the Memory select function.
4
Press the record key, g, to confirm.
5
Press + / – to select if you want to save the files in the internal
memory or on the microSD card.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.2 Adjust the record settings automatically (DVT3000 –
DVT7000)
This function allows the device to automatically adjust the record
settings (recording quality, microphone sensitivity etc.) to suit the
recording conditions.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the Auto Adjust Rec function.
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the function.
6
Press the record key, g, to confirm.