Philips DVT7000/00 - Page 43

43
Settings
Table of contents
9.1.6 Enable/disable noise reduction (DVT3000 – DVT7000)
When you record in environments with lots of noise in the background
(e.g. while in a crowd or during a train or car journey), you can enable
the noise reduction function to reduce the background noise.
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the Noise reduction function.
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the function.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.1.7 Setting editing mode
You can edit an existing recording by overwriting a part of it or adding
a new one at its end. You can use the Overwrite mode to delete the
existing recording from its current position!
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the record settings menu Ó.
3
Press + / – to select the Edit mode function.
4
Press the record key, g, to confirm.
5
Press + / – to select if you wish to add a new part to an existing
recording, whether you want to delete a part of an existing
recording and overwrite it, or turn o the function.
X The selected editing mode icon will be displayed.
Å–add a recording
Æ–overwrite a recording
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.