Philips DVT7000/00 - Page 50

50
Settings
Table of contents
9.3.2 Enable/disable ClearVoice
Turn on the ClearVoice function for better playback quality. Dynamic
emphasis on quiet passages to improve the intelligibility of quiet voices.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the ClearVoice function.
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the function.
X If the feature is on, the Ç icon is displayed.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.3 Equalizer settings (DVT3000 – DVT7000)
The equalizer is used for music playback. This setting improves the
listening experience when playing back music by custom frequency
settings.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the Equalizer function.
4
Press the record key, g, to confirm.
5
Press + / – to select the appropriate setting or disable this feature.
X If this feature is on, the selected equalizer mode is displayed.
È–Pop
É–Jazz
Ê–Classic
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.