Philips DVT7000/00 - Page 52

52
Settings
Table of contents
11
Press + / – to select the Off function to turn o the alarm-clock.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3.6 Enable/disable key and signal tones
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the Device sounds function.
4
Press the record key, g, to confirm.
5
Press + / – to enable/disable the key and signal tones.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.