Philips E6 Series User Manual

E6 Series
Commercial Emergency Lighting
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
is provided by two fully-
adjustable polycarbonate lamp
heads. Each lamp head utilizes
a high-performance parabolic
reflector in conjunction with a
6 VDC, 5.4 W T-5 wedge base
tungsten lamp. High-impact
acrylic refractors minimize
glare and maximize optic
control.
Housing: Constructed of
impact resistant , UL 94 V-0,
5 VA thermoplastic, completely
self-contained. White housing
is standard, with an optional
black housing available.
Operating Temperature
Range: Damp Location
68°F (20°C) to 104°F (40°C)
Diagnostic Electronics
(standard): 120/277 VAC
dual voltage input with surge-
protected, solid-state charging
circuitry provides for a reliable
charging system. Charging
system is complete with
low voltage disconnect, AC
lockout, brownout protection,
AC indicator lamp and test
switch.
Self-Testing Diagnostics
(optional): Continuously
monitors the critical functions
of the equipment, including:
battery disconnect, battery
failure, charger failure,
transformer failure and lamp
failure. Self-Testing routine
performs a one-minute test
every 30 days, a 30-minute
test on the 6th month and a
90-minute test annually.
Electrical Specifications:
0
.045 A (120 VAC)
0.020 A (277 VAC)
Code Compliance
UL 924 and UL damp location
l
isted. NFPA 101, NEC, BOCA,
OSHA and IBC illumination
standards.
Warranty
Three year full electronics
w
arranty. One year full plus
four year prorated battery
warranty.
E611
16.0"
(40.6 cm)
5.0"
(12.7 cm)
11.87"
(30.15 cm)

Philips E6 Series Specifications

General

Type	Work Light
Light Source	LED
Beam Angle	120°
Voltage	220-240V
Frequency	50/60 Hz

Summary

Product Features and Specifications

Illumination

Two adjustable polycarbonate lamp heads with high-performance parabolic reflectors and 6 VDC, 5.4 W tungsten lamps.

Housing

Constructed of impact resistant, UL 94 V-0, 5 VA thermoplastic, self-contained with white housing standard.

Operating Temperature Range

Suitable for damp locations, operating between 68°F (20°C) and 104°F (40°C).

Diagnostic Systems

Diagnostic Electronics (Standard)

120/277 VAC dual voltage input with surge-protected, solid-state charging circuitry, low voltage disconnect, AC lockout.

Self-Testing Diagnostics (Optional)

Monitors critical functions like battery/charger failure, lamp failure, and performs periodic tests.

Compliance and Warranty

Code Compliance

UL 924 and UL damp location listed, meeting NFPA 101, NEC, BOCА, OSHA, and IBC standards.

Warranty Information

Three year full electronics warranty and one year full plus four year prorated battery warranty.

Electrical Specifications