1 Fill 1/3 of a jug with cold milk.
2 Insert the classic milk frother into the milk.
3 Press the STEAM button.
-
The machine starts dispensing steam.
4 Froth the milk by gently swirling the jug and moving it up and down.
5 Press the OK button to stop frothing.
Hot water
Warning: Danger of scalding! Dispensing may be preceded by
small jets of hot water. Use the appropriate protective handle
only.
1 Place a jug under the classic milk frother.
2 Press the HOT WATER button.
-
The machine starts dispensing water.
3 To stop dispensing hot water, press the OK button.
Adjusting volume and taste
Adjusting coffee volume
You can adjust the volume of the beverage brewed according to your taste
and to the size of the cups.
1 To adjust the espresso volume, press and hold the ESPRESSO button
until the display shows the MEMO icon.
11
English
To Next Page
Loading...
