Warning icons and error codes
Meaning of the warning icons
Fill the water tank with fresh
water to the MAX level
indication.
The brew group is blocked by
coffee powder. Clean the brew
group.
The bean hopper is empty.
Put new coffee beans in the
bean hopper.
Insert the drip tray and close
the service door.
The brew group is not in the
machine or it is not inserted
correctly. Insert the brew
group.
If the display shows an error
code, check section 'Meaning
of the error codes' to see what
the code on the display means
and what you can do. The
machine cannot be used when
this icon is on the display.
The coffee grounds container
is full. Make sure the machine
is switched on. Then remove
and empty the coffee
grounds container.
Meaning of the error codes
Below you find a list of the error codes showing problems that you can solve
yourself. Support videos are available on www.philips.com/coffee-support.
If another error code appears, please contact the Philips Consumer Care
Center in your country. For contact details, see the warranty leaflet.
Error code
Problem Cause Possible solution
01 The coffee grinder is
blocked
The coffee exit duct is
clogged.
Switch off the machine. Clean the
coffee exit duct thoroughly with the
handle of the measuring spoon or a
spoon handle. Then switch the
machine on again.
03 - 04 There is a problem
with the brew group.
The brew group is
dirty or not well
greased.
Switch off the machine. Rinse the
brew group with fresh water, let it air-
dry and then lubricate it (see
'Lubrication'). Then switch the
machine on again.
22
English
To Next Page
Loading...
