EasyManua.ls Logo

Philips EP5333 - Adjusting Coffee Volume;Volume of Milk-Based Drinks; Adjusting Grinder Settings; Adjusting Coffee Strength; Personalizing Drinks

Philips EP5333
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Personalizing drinks
Adjusting
coffee and milk volume
You can
adjust the volume of the drink brewed according to your taste and to the size of the cups. We
advise you to
use glass cups or cups with a ceramic-coated rim.
Adjusting
coffee volume
1 To adjust the espresso volume, press and hold the ESPRESSO button until the display shows the
MEMO
icon (Fig. 18).
-
The machine enters the programming
phase and starts to brew the selected drink.
2 Press the
OK button (
)
when the cup contains the desired amount of espresso.
-
The tick on the display shows that the button is programmed: every time it is pressed, the
machine brews the set espresso volume.
Note:
To set the volume of coffee, follow the same procedure.
Adjusting volume
of milk-based drinks
1 To set the volume for cappuccino and latte macchiato, first insert LatteGo and add milk.
2 Press and
hold the milk-based drink button until the display shows the MEMO icon. The machines
first starts dispensing milk.
3 Press the OK button (
)
when the cup contains the desired amount of milk. Then the machine
starts dispensing the coffee.
4 Press the
OK button again to save the desired coffee volume.
Note:
If you personalize milk drinks, then you may need to fill the milk container with more or less
milk
than indicated for this drinks on LatteGo.
Adjusting
coffee strength
-
To
change the coffee strength, press the AROMA STRENGTH button.
-
Each
time you press the AROMA STRENGTH button, the machine selects a higher aroma strength
setting. There
are 5 strengths, 1 is very mild and 5 is very strong. After setting 5, setting 1 is selected
again
(Fig. 19).
-
Note: You can also use the AROMA STRENGTH button to brew coffee with pre-ground coffee
-
The
display shows the chosen strength. After adjusting the coffee strength, the display shows the
main
menu again and saves the chosen aroma strength when you brew a coffee.
Adjusting grinder
settings
You can adjust
the grinder settings by using the grind setting knob inside the bean container. There
are
5 different grind settings you can choose from. The lower the setting, the stronger the coffee.
Note: You can only
adjust the grind settings when the machine is grinding coffee beans. You need to
brew 2 to 3 drinks before you can taste the full difference.
Caution:
Do not turn the grind setting knob more than one notch at a time to prevent damage to the
grinder.
1 Place a cup under the coffee dispensing spout.
2 Open the
lid of the bean hopper.
13
English

Related product manuals