Getting started
1 Slide open the battery door.
2 Remove battery insulation sheet.
3 Slide close the battery door.
Connect
Operation
Listen to CD:
1 Slide the switch to CD position.
2 Use 9, J( / )K, 2; to control the CD play-
back.
3 On the remote control, press
9 to power
on and start playback.
4 Adjust the volume and sound on your
remote control.
5 To stop playback, press
9.
6 To switch off the CD player, press
9 again.
Listen to FM station:
1 Slide the switch to FM position, press scan
once or more to find your desired station.
2 Repeat step 1 to find another station.
3 If no stations are found, press reset and
repeat steps 1-2.
4 To switch off the FM, slide the switch to
CD (FM OFF) position.
Tips
• There is no FM station displayed on the
LCD screen of the CD player.
• When you press ON/OFF and FM TUNER
is displayed on the LCD of the
CD player, it means the
remote control is switch to FM
Tuner mode. You cannot listen
to CD in this mode. You can
slide the switch to CD (FM Tuner OFF)
position when you want to listen to CD.
• Listen to FM station ONLY with remote
control. There is no FM function in the CD
player.
Quick start guide
To Next Page
Need help?
Sound
Power
