Philips F8 - White Balance

2.2 In case of “Factory Key” is enabled, just press RCU “Return” key to pop-up again the
Factory menu.
3 White balance
I
tem
Sub-item Value Note
White
Balance
Source
HDMI/TV/AV
Color temperature
Standard
Warm
Cool
Select Tone by pressing”< >”key
R Gain 0~255
Set R Gain by pressing”< >”key
G Gain 0~255
Set G Gain by pressing”< >”key
B Gain 0~255
Set B Gain by pressing”< >”key
R Offset 0~255 Set R Offset by pressing”< >
”key
G Offset 0~255
Set G Offset by pressing”< >”key
B Offset 0~255
Set B Offset by pressing”< >”key
White Balance Init
Do
Press “>” key to initialize RGB
Gain/Offset values
Picture Related
Press “>” key to activate submenu
Item
Sub-item Value Note
Picture
Related
Dynamic Contrast
On/Off
Press “< >” key to enable/disable
Light Sensor
Press “>” key to activate submenu
Back light 0~100
Set Backlight by pressing”< >”key
Dynamic Backlight
control
0/1/2/3 Select by pressing”< >”key
Energy Save
High/Low/Off
Press “< >” key to enable/disable
APL1 0~255
Set APL1 point value by
pressing”< >”key
APL1_BL 0~100
Set APL1 Backlight value by
pressing”< >”key
APL2 0~255
Set APL2 point value by
pressing”< >”key
BP 0~100
Set B point value by
pressing”< >”key
K 0~100
Set K value by pressing”< >”key
17