Only remove the battery pack if it is completely empty.
2 Let the appliance run until it stops.
3 Undo the screws and remove the lid of the battery
compartment (Fig. 30).
4 Disconnect the terminals one by one and remove the battery
pack (Fig. 31).
If you need information or if you have a problem, please visit the Philips
website at
www.philips.com or contact the Philips Customer Care
Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Customer Care Centre in your country,
go to your local Philips dealer or contact the Service Department of
Philips Domestic Appliances and Personal Care BV.
Problem Possible cause Solution
The
appliance
does not
work.
You have not
charged the
appliance.
Charge the appliance (see chapter
‘Charging’).
You have not
inserted the
adapter properly
into the wall
socket.
Insert the adapter properly into
the wall socket.
ENGLISH 13
To Next Page
Loading...
