- Crevice tool and small nozzle.
Note: Make sure the suction opening of the small nozzle points away
from the holder.
- Crevice tool and small brush.
Note: Make sure the suction opening of the small brush points towards
the holder.
Using the appliance
1 Pull the cord out of the appliance and put the mains plug in the wall
socket.
2 Press the on/off button on top of the appliance to switch on the
appliance.
3 During vacuum cleaning, you can adjust the suction power with the
knob on top of the appliance.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
4 If you want to pause for a moment, insert the ridge on the nozzle
into the parking slot to park the tube in a convenient position.
ENGLISH 11
To Next Page
Loading...
