13
3 Select Philips_Fidelio_AirPlay from the list
of available networks.
Tip
To change the name of the unit for AirPlay, proceed
with steps 2 to 7 in ‘Scenario 2: Connect to a non-WPS
router’ below.
For some wireless routers, you may need to hold the
WPS button for WPS connection. See the user manuals
of the specific routers for details.
•
•
Scenario 2: Connect to a non-WPS
router
You can connect the unit to a non-WPS router
through
an iOS 4.2 (or later) enabled iPod
touch/iPhone/iPad
a Wi-Fi enabled PC or Mac installed
with iTunes 10 (or later)
1 Press and hold WI-FI SETUP on the back
of the main unit for more than 5 seconds.
The
indicator blinks in green and
yellow alternately.
2 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
Or enter the list of available wireless
networks on your PC/Mac.
•
•
»
•
WPSWPS
EN
To Next Page
Loading...
