Philips Flite SHB4805 - Using Your Headphones; Establishing a Bluetooth Connection; Managing Calls and Music Playback

6
EN
4 Use your
headphones
Connect the
headphones to a
Bluetooth device
1
Make sure that the mobile phone
is turned on and its Bluetooth
feature is activated.
2
Press and hold / to turn the
headphones on.
» The blue LED ashes for every
8 seconds.
» The headphones are
reconnected to the
last connected mobile
phone/Bluetooth device
automatically. If the last one is
not available, the headphones
try to reconnect to the second
last connected device.
Tip
• If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
Note
• If the headphones fail to connect to any
Bluetooth device within range in 5 minutes,
it will switch o automatically to save the
battery life.
Manage your calls and
music
On/o
Task Button Operation
Turn the
headphones
on.
/
Press and
hold for 2
seconds.
Turn the
headphones
o.
/
Press and
hold for 4
seconds.
» The
white
LED is
on and
fades
out.
Music control
Task Button Operation
Play or pause
music.
Press once.
Adjust volume. +/- Press once.
Skip forward. + Press and
hold.
Skip
backward.
- Press and
hold.
Call control
Task Button Operation
Pick up/hang
up a call.
Press once.
» 1 beep.
Reject an
incoming call.
Press and
hold for 2
seconds.
» 1 beep.
Mute/unmute
the microphone
in a call.
/
Press twice.
» 1 beep.