Do you have a question about the Philips FW 326 and is the answer not in the manual?
Number of speakers | 2 |
---|---|
CD Player | Yes |
Optical disc player type | CD player |
Cassette deck | Yes |
Playback MP3 | Yes |
Playback CD-R | Yes |
Playback CD-RW | Yes |
Radio Tuner | Yes |
Tuner type | Digital |
RDS tuner included | Yes |
USB Playback | Yes |
Remote Control | Yes |
Bluetooth | No |
Speaker Type | 2-way |
Supported radio bands | FM |
RDS functions | PTY |
Audio Inputs | AUX |
Guidance on fuse replacement and disposal of the mains plug.
Instructions for wiring a plug with color-coded wires.
Details on type plate, copyright, and radio interference compliance.
Information on packaging materials and recycling.
List of accessories supplied with the system.
Precautions on voltage, system placement, ventilation, and environmental exposure.
Warnings against self-repair, handling moisture, and electrostatic discharge.
Visual guide to rear connection ports for speakers, antennas, and audio out.
Instructions for connecting AM/FM antennas and speakers for optimal reception.
Guide to connecting external audio sources via AUX and AC power supply.
Diagrams illustrating the physical controls on the system and its remote.
Detailed explanation of buttons for standby, source selection, playback, and sound controls.
Instructions for preparation, demonstration mode, and switching the system on/off.
Guide to selecting sources, volume, Dynamic Bass Boost, Digital Sound Control, and Incredible Surround.
Instructions for inserting, playing, pausing, and stopping CD playback.
Steps for programming tracks, random shuffle, and repeat playback modes.
Procedures for scanning and manually tuning radio stations.
How to tune to RDS stations and synchronize the clock via RDS time.
Steps for loading, playing, pausing, rewinding, and stopping tape playback.
Guide to continuous playback between decks and connecting external audio sources via AUX.
Instructions for recording from external sources and dubbing tapes between decks.
How to record CDs or other sources onto tape.
Procedure to view the current time and set the clock manually.
Steps to set the system to switch on automatically at a preset time or cancel the timer.
Guidance on cleaning components and demagnetizing tape heads.
Detailed technical data for amplifier, tape deck, speakers, CD player, and tuner.
Solutions for common problems like 'NO DISC' display or poor radio reception.
Troubleshooting for system unresponsiveness, remote control issues, and demonstration mode.