2-10
Brief Operating Instructions
INTERNAL RECORDING
18
High speed recording of an entire disc, a track, a
program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press either CD 1, CD 2 or CD 3 to select the disc from
which you wish to record.
3 Press REC TYPE on the unit to enter into the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following high speed recording modes:
If a disc from the CD changer is selected:
yCD Fast?: for high speed recording of an entire disc
• Continue with step 5.
yTrack Fast?: for high speed recording of a track
• Press YES to confirm.
• Rotate í JOG CONTROL ë to select the track.
yRec Tr and the track number is displayed.
• Continue with step 6.
If CD changer program mode is available:
yProg Fast?: for high speed recording of the selected
disc or of the program
If CD changer track edit mode is available:
yA-B Fast?: for high speed recording of the A–B track
5 Press YES to confirm your selection.
yBoth decks will be selected in the display, the arrow
starts blinking. The remaining recording time of the
CDR(W), the total recording time of the CDR(W) and
either Record CD1 (or 2, 3)?, Record Prog? or
Record A-B? is displayed.
Note: When the CDR(W) already contains a recording,
ALC
will also become active and
ALC
will be shown.
6 Press YES to start high speed recording.
yThe arrow lights, RECORDING IN PROGRESS is shown, high
speed recording starts and the actual recording time
remaining starts to count down.
• To stop recording, press Ç STOP on the unit.
Normal recording and listening of an entire disc, a
track, a program or a track edit
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Follow steps 2 and 3 of “High speed recording”.
3 Rotate í JOG CONTROL ë to select one of the
following normal record options:
If CD changer is selected:
yCD Listen?: for listening to the entire disc during
normal recording
yTrackListen?: for listening to the track during
normal recording
• Press YES to confirm.
• Rotate í JOG CONTROL ë to select the desired
track.
yRec Tr and the track number is displayed.
• Continue with step 6 of “High speed recording”.
If CD changer program mode is available:
yProg Listen?: for listening to the program during
normal recording
If CD changer track edit mode is available:
yA-B Listen?: for listening to the A–B track during
normal recording
4 Follow steps 5 and 6 of “High speed recording”.
• To stop recording, press Ç STOP on the unit.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
Normal recording and listening
High speed recording
English
DISPLAY
CDR
iR SEN
SO
R
TUNER
D
IG
IT
A
L
/ A
N
A
LO
G
AUX
CD TEXT
CLOCK/TI
OPEN
/CLOSE
M
IC
M
IC
LEVEL
CD
-
TEXT EDITING
STANDBY
ON
CD
1
CD 2
CD 3
REC TYPE
EDIT
COMPILE CD
FINALIZE
ERASE
CD
CD
RECO
RD
FW-
R8
CD
RECO RDABLE
MIN I HIF I SY STEM
CD
RECORDER
INTERNAL RECORDING
19
Manual recording from the FM tuner
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press TUNER repeatedly to select the FM tuner. Then select
the desired radio station (see “Tuning to radio stations”).
3 Press REC TYPE on the unit to enter the recording menu.
yFM Tuner? is displayed.
4 Press YES to confirm.
yWait and Record? are displayed.
5 Press YES to start recording.
yThe arrow lights, RECORDING IN PROGRESS is shown,
manual recording starts and the actual recording time
remaining starts to count down.
6 Press Ç STOP to stop recording.
Manual microphone recording
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect
the microphone.
3 Connect a microphone to MIC.
4 Press CD 1, CD 2 or CD 3 to select the disc with which you
wish to mix the microphone.
5 Press REC TYPE on the unit to enter the recording menu.
6 Rotate í JOG CONTROL ë to select the manual recording
mode for the microphone:
yCD Mix Mic is displayed.
7 Press YES to confirm.
yWait and Record? are displayed.
8 Press YES to start recording.
9 Rotate í JOG CONTROL ë to select the desired track.
yThe disc tray number, the current track number and
playing time of the track are displayed.
10 Press É PLAY/PAUSE to start playback.
yThe selected source is mixed with the microphone.
11 Press Ç STOP to stop recording.
• To perform microphone recording only, see “Manual
recording” in chapter “External recording”.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
Manual recording
English
DISPLAY
CDR
iR SEN
SO
R
TUNER
D
IG
IT
A
L
/ A
N
A
LO
G
AUX
CD TEXT
CLOCK/TI
OPEN
/CLOSE
M
IC
M
IC
LEVEL
CD
-
TEXT EDITING
STANDBY
ON
CD
1
CD 2
CD 3
REC TYPE
EDIT
COMPILE CD
FINALIZE
ERASE
CD
CD
RECO
RD
FW-
R8
CD
RECO RDABLE
MIN I HIF I SY STEM
CD
RECORDER
www.freeservicemanuals.info
Digitized in Heiloo Netherlands
To Next Page
Loading...
