INTERNAL RECORDING
19
Manual recording from the FM tuner
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press TUNER repeatedly to select the FM tuner. Then select
the desired radio station (see “Tuning to radio stations”).
3 Press REC TYPE on the unit to enter the recording menu.
yFM Tuner? is displayed.
4 Press YES to confirm.
yWait and Record? are displayed.
5 Press YES to start recording.
yThe arrow lights, RECORDING IN PROGRESS is shown,
manual recording starts and the actual recording time
remaining starts to count down.
6 Press Ç STOP to stop recording.
Manual microphone recording
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect
the microphone.
3 Connect a microphone to MIC.
4 Press CD 1, CD 2 or CD 3 to select the disc with which you
wish to mix the microphone.
5 Press REC TYPE on the unit to enter the recording menu.
6 Rotate í JOG CONTROL ë to select the manual recording
mode for the microphone:
yCD Mix Mic is displayed.
7 Press YES to confirm.
yWait and Record? are displayed.
8 Press YES to start recording.
9 Rotate í JOG CONTROL ë to select the desired track.
yThe disc tray number, the current track number and
playing time of the track are displayed.
10 Press É PLAY/PAUSE to start playback.
yThe selected source is mixed with the microphone.
11 Press Ç STOP to stop recording.
• To perform microphone recording only, see “Manual
recording” in chapter “External recording”.
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible CD player
and CD recorder.
Manual recording
English
To Next Page
Loading...
