To Next PageTo Next Page
Need help?Do you have a question about the Philips FW380C and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| FM Tuner | Yes |
| Bluetooth | No |
| USB Playback | Yes |
| AUX Input | Yes |
| Tuner Bands | FM |
| Speaker Type | 2-way Bass Reflex Speaker System |
Highlights include 800W PMPO, 2x25W RMS stereo, DSC, DBB, dual tape deck, and remote control.
Covers amplifier output, CD changer, tuner features, and tape deck capabilities.
Details loudspeaker system, connectivity options, general features like clock and karaoke.
Explanation of Digital Sound Control (DSC) and Dynamic Bass Boost (DBB) functions.
Covers mains voltage, tuner frequency ranges, IF frequencies, and amplifier output power.
Technical data for cassette recorder, CD player, and LW tuner, including response and rejection.
Describes test setups using RF generators and voltmeters for various system components.
Lists necessary service tools, test cassettes, ESD protection gear, and chip component handling.
Warnings on electrostatic discharge (ESD) sensitivity and proper handling procedures.
Covers safety regulations, using original parts, and laser product safety advice.
Information on the system's type plate, serial number, and recording rights.
Details on packaging, recycling, disposal, and basic safety information.
Instructions for connecting antennas, speakers, external equipment, and subwoofer.
Guidance on inserting batteries into the remote control for proper operation.
Detailed identification of buttons on the system unit and the multi-function remote control.
Covers demonstration mode, Easy Set, switching the system ON/Standby, and source selection.
How to select audio sources, adjust volume, and use the mute function for temporary silence.
Instructions for loading CDs, CD Direct Play, and basic playback operations.
Details on changing discs, selecting tracks, searching passages, and programming tracks.
Explains shuffle play, repeat track function, program playback, and reviewing/erasing programs.
Guides on automatic and manual tuning, storing preset stations, and changing MW tuning grids.
Instructions for loading tapes, performing playback, and using rewind/fast forward functions.
Procedures for dubbing tapes between decks and synchro recording from CD.
How to record audio from external sources like AUX, Tuner, or CD onto tape deck 1.
Instructions for viewing and setting the system's clock, including automatic reset after power loss.
Guide to setting the timer for automatic playback of CD or Tuner as an alarm.
Instructions for cleaning the cabinet, discs, heads, tape paths, and demagnetizing tape heads.
Solutions for CD player, radio reception, tape deck, and general system operational problems.
Steps to enter the service test program by holding buttons while plugging in the mains cord.
Covers display, tuner, tape, EEPROM, key, clock, and volume tests for system diagnostics.
List and description of error codes (E1000-E2021) related to CD player malfunctions.
Detailed tests for tray motor, disc motor, sledge motor, and servo systems for troubleshooting.
Overall wiring diagram showing connections between major boards like Front, Combi, and Tuner.
Circuit diagrams for the tape deck mechanism and CD drive components.
List of mechanical components for the 3-CD module, including part numbers and descriptions.
Details electrical components like resistors, capacitors, and flex foil connectors with part numbers.
Parts breakdown for left/right and surround speaker boxes, plus main unit screw lists.
