38
English
Ta pe Operation/Recording
IMPORTANT!
– Recording is permissible if copyright
or other rights of third parties are not
infringed upon.
– Recording is possible only in tape deck
2.
Preparation for recording
1 Load a recordable tape into tape deck 2 with
the full spool to the left.
2 Prepare the source to the recorded.
DISC – load the disc(s)
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
3 Press DISC, TAPE, TUNER or AUX to select
the source.
4 Start to play the selected source.
5 Press REC to start recording.
To stop recording
● Press 9 on the system.
Disc synchro recording
1 Press DISC to select the disc.
● You can record programmed tracks in the order
you want.
2 Press REC to start recording.
➜ “REC” will flash, but the first 7 seconds of the
start passage will not be recorded.
Selecting another track during recording
1 Press 2;.
2 Press O or P to select another track.
To stop recording
● Press 9.
➜ Recording and disc playback will stop
simultaneously.
p001-p047-FWD39-21_Eng 3/10/05, 09:0338
To Next Page
Loading...
