12
Play audio from an external
device
You can also listen to an external audio device
through this system with an MP3 link cable (not
supplied).
1 Connect the MP3 link cable to
the • MP3 LINK socket.
the audio output socket of the •
external device.
2 Press MP3 LINK repeatedly to select
MP3 link mode.
3 Start to play the external device (see the
user manual of this device).
To remove the iPod/iPhone:
Pull the iPod/iPhone out of the dock.
Charge the iPod/iPhone
When the system is connected to power, the
docked iPod/iPhone starts charging.
Play from USB
Note
Make sure that the USB device contains •
playable audio content.
1 Insert the USB device into the socket.
2 Press USB to select the USB source.
Play starts automatically. »
EN
To Next Page
Loading...
