Philips FWM9000 - Main Unit Control Details

1 - 7
:
:
:
:
:
output power 1kHz
IS : YES
<4
dB
YES
Hum ( Volume control from min. till max. – 20 dB)
< 200 nW
Residual Noise ( Volume Minium ) < 60
3Bd04- ta recnereffiD lennahC
MAX
nW
Standby Mode Indicator : FTD display Clock active
OUTPUT stage Protection : Yes Temperature : Yes. Shorcircuit : Yes
LoudSpeaker D.C. Protection : Yes.
INDICATORS
ECO Mode Indiicator : FTD turns off, ECO - Standby LED turn on
TECHNIAL DESCRIPTION
Total power 1500W, matching LOUDSPEAKER of 4 x 8 Ohm +2 x 4 Ohm. INPUT SOURCE, CD/MP TUNER USB AUX 3DSC ( Digital Sound Control ). IS
( Incredible Sound )
GENERAL PART
) zHk 1 ta ( noitarapeS lennahCA/N: CAV
≥ 45
DSC : Rock, Pop, Jazz, Optimal
WOOX : N/A
µW
Signal / Noise ( unweighted )
≥ 55
Subwoofer Out Hum( Volume minmun)
dB
ELECTRICAL DATA (Main computer )
dB
A.N) thgiR / tfeL ( tuO eniLnoitaludoM %08MA ZHK5.76 MF renuT
INTERCONNECTS
Input Sensitity(
±2 dB)rated ouput power at 1 kHz and 10kHz.
Line Output Voltage ( *1 )
seYtuO refoowbuS ) 53 krT ,1 csiD oiduA ( kcart Bd 0 DC
A.NtuO laixaoC latigiD 73/ rof Vm009 ~ Vm053 :miL Vm006 :roN
mhO 23 ta %2.0 -/+ V7.0enohpdaeH ) 53 krT ,1 csiD oiduA ( kcart Bd 0 BSU
A.NtuO retsooB55/ rof V5.2 ~ V5.1 :miL V2 :roN
AUX
Subwoofer L/R : 8 Ohm x2 at 40HZ to 100HZ
Rear: L/R : 4 Ohms X2 at 200Hz to 16 KHz
Remarks
OUTPUT POWER ( * 1 )
At THD = 10% (Measured with 20Hz-20KHz filter),(Per Channel measuremend )
L/R channel 300W ( Lim '-1dB )Power output ( RMS )
Power output ( RMS )
( *1 ) Measurement output power just connect 2 channel loads.
Tuner output ( Lim '-6dB )
Rated Impedance
FRONT:L/R : 8 Ohms X2 at 40Hz to 16 KHz
L/R Subwoofer channel 300W ( Lim '-1dB )Power output ( RMS )
) Bd1-' miL ( W051lennahc raeR R/L) SMR ( tuptuo rewoP
SUB. Channel
Rear channel
Measurement output power only for AUX model and CD model of used audio analyzer equipment.
Ver
(*2) All speaker "R" channel "+ "connect to equipment " + "for measurement.
All speaker "L" channel "- "connect to equipment " + "for measurement (because all "L"channel output are reverse ).
GENERAL PART 1 - TECHNAICAL SPECICFICATION
Issued DateClass No
08-09-2011
Electrical parameters are to be measuremend at specker terminals across 8 Ohm load ( pure resistor )
with rated input signal in AUX mode; DSC setting in Jazz mode with DBB OFF
IS off and OSM unless specified otherwise
40HZ-16KHZ(reference 1KHZ)
40HZ-125HZ(reference 63HZ)
200HZ-16KHZ(reference 1KHZ)
Main Channnel
3
input leven 1mv rms(lim:2.5mv rms)
Rs=600ohm
Bd4±@ esnopser ycneuqerF:enohporciM
2
FWM9000 All Version
LOUDSPEAKER ( BOXES ) Please to package document of Speaker Box Assy
A4
1
DATE :
NAME : Andy Lai
KT CHECK
10 10 SH 190 - 4