Need help?Do you have a question about the Philips GC3232/02 and is the answer not in the manual?
General| Power | 2400 W |
|---|---|
| Steam output | 40 g/min |
| Water tank capacity | 300 ml |
| Cord length | 2 m |
| Weight | 1.2 kg |
| Type | Steam Iron |
| Vertical Steam | Yes |
| Spray Function | Yes |
| Drip Stop | Yes |
| Calc Clean Function | Yes |
| Auto shut-off | Yes |
| Self-cleaning | Yes |
| Anti-drip system | Yes |
Read instructions carefully, check voltage, use earthed socket, avoid damaged cord, never leave unattended, keep away from children.
Remove protective covers. Initial use may produce smoke which will cease after a short while.
Filling the water tank with tap water and setting the correct ironing temperature based on fabric care labels.
Ensure sufficient water, select appropriate temperature, and choose a steam setting (1-4) suitable for the temperature.
Set the steam control to position 0 (no steam) and select the required ironing temperature.
Use to remove stubborn creases. Ensure water is present and press the spray button to moisten fabric.
Provides a powerful steam burst for creases. Usable at specific temperature settings (●● to MAX).
Steam for use on hanging garments like clothes or curtains. Never direct steam at people.
Automatically prevents water dripping from the soleplate at low temperatures to avoid staining.
Automatically switches iron off if inactive for a period. A red light blinks; pickup reactivates the iron.
Unplug, cool down, clean soleplate, empty water tank, wind cord, and store the iron upright.
System for longevity and preventing clogging. Perform Calc-Clean procedure regularly for optimal performance.
Check power connection, temperature dial, water level, and steam control settings for no heat or steam.
Address issues with steam settings, insufficient temperature, improper cap closure, or water tank additives.
Manage hard water issues using the Calc-Clean function. Reactivate iron by moving it if safety shut-off is triggered.
To Next Page