Philips GC3232/02 - Using the Appliance; Steam Ironing Procedure; Ironing Without Steam; Spray Function Operation

Using the appliance
Steam ironing
1 Make sure that there is enough water in the water tank.
2 Select the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
C
3 Select the appropriate steam setting. Make sure that the steam
setting you select is suitable for the ironing temperature
selected:
- 1 - 2 for moderate steam (temperature settings 2 to 3)
- 3 - 4 for maximum steam (temperature settings 3 to MAX)
B
The iron will start steaming as soon as the set temperature has been
reached.
B
If the selected ironing temperature is too low (MIN to 2), water may
drip from the soleplate (see section 'Drip stop').
Ironing without steam
C
1 Set the steam control to position 0 (= no steam).
2 Select the recommended ironing temperature (see chapter
'Preparing for use', section 'Setting the temperature').
Features
Spray function
You can use the spray function to remove stubborn creases at any
temperature.
1 Make sure that there is enough water in the water tank.
C
2 Press the spray button several times to moisten the article to
be ironed.
Shot of steam
A powerful shot of steam helps to remove stubborn creases.
The shot-of-steam function can only be used at temperature settings
between 2 and MAX.
ENGLISH6