General description
A Spray nozzle
B Cap of filling opening
C Steam boost
D Spray button
E Steam control
F Ionic steam button (GC4440/GC4430)
G Ionic steam light (GC4440/GC4430)
H Temperature dial
I Amber temperature light (GC4420/GC4410) and red automatic
shut-off (AUTO/OFF) indication (GC4420 only)
J Amber temperature light and red automatic shut-off (AUTO/OFF)
indication (GC4440/GC4430)
K Mains cord
L Type plate
M Soleplate
N Calc-Clean button
Not shown: Heat-resistant protective cover (GC4440 only)
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Only connect the appliance to an earthed wall socket.
◗ Do not use the appliance if the plug, the cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or is leaking.
◗ Check the cord regularly for possible damage.
◗ If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗ Never leave the appliance unattended when it is connected to
the mains.
◗ Never immerse the iron and the stand, if provided, in water.
ENGLISH6
To Next Page
Loading...
