Before rst use
This appliance is intended for ironing and refreshing fabrics only.
1 Remove all packaging material and stickers.
2 Remove the protective cover from the soleplate before you use the
appliance.
3 Remove the hangtag from the iron.
Using the appliance
Checking the water hardness
Your appliance has been designed to be used with tap water. If you live in
an area with very hard water, fast scale build-up will occur. It is therefore
recommended to check the water hardness rst with the test strips
provided.
1 Dip the test strip in tap water for 1 second.
2 Shake the strip for 60 seconds.
3 Check how many squares on the test strip have changed colour and
compare with the details in the water hardness table below.
60 sec.
ENGLISH 11
To Next Page
Loading...
Need help?
General