EasyManuals Logo

Philips GC6310 User Manual

Philips GC6310
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2 Put the mains plug in an earthed wall socket and set the iron switch to ‘on’.
The soleplate starts to heat up.
3 Iron without pressing the steam activator.
If you press the steam activator by accident while you iron, some steam will escape. To avoid
this, set the steam tank switch to ‘off’ to cut off the steam supply completely.
If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank.
This phenomenon is caused by the opening of the steam valve and is perfectly harmless.
After ironing
1 Set the iron switch to ‘on’ and the steam tank switch to ‘off’. (Fig. 4)
2 Press the steam activator until you no longer hear any steam escape from the
appliance (Fig. 10).
The steam tank is now depressurised.
3 Remove the mains plug from the wall socket.
4 Put the iron on the iron stand and let the appliance cool down before you start to clean it.
Features
Vertical steam ironing
Never direct the steam at people.
To steam iron hanging curtains and clothes (jackets, suits, coats), hold the iron in vertical
position (Fig. 11).
1 Press the steam activator.
Variable steam (GC6320 only)
The steam control is continuously adjustable and can be set to any position between MIN and MAX
(see chapter ‘Preparing for use’).
Cleaning and maintenance
Iron
Let the appliance cool down sufciently before you clean the iron.
Never immerse the iron in water nor rinse it under the tap.
1 Clean the iron with a damp cloth.
2 Wipe scale and any other deposits off the soleplate with a damp cloth and a non-abrasive
(liquid) cleaner.
Steam tank
Let the appliance cool down sufciently before you remove the steam tank cap.
Rinse the steam tank once a month or after you have used the appliance approximately 10 times.
1 Carefully remove the steam tank cap (Fig. 2).
2 Rinse the steam tank with 500ml of fresh water. Then hold the steam tank upside down over
the sink to pour out the water (Fig. 12).
3 Screw the cap back onto the steam tank.
,
,
,
,
ENGLISH10

Other manuals for Philips GC6310

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips GC6310 and is the answer not in the manual?

Philips GC6310 Specifications

Power IconPower
iron wattage800 W
boiler wattage1250 W
voltage230 V
Technical Specifications IconTechnical Specifications
frequency50 Hz
start-up time8 minutes
water tank capacity1 l
Weight and Dimensions IconWeight and Dimensions
weight including packaging6.06 kg
dimensions276 X 332 X 412 mm

Related product manuals